With the heavy traffic and large amounts of weight that residential gates come into contact with every day, they often have to be repaired or replaced. If you own a place with a gate, you should know what issues to look out for so that you can handle any situation professionally. Below are maintenance issues that you must be familiar with before installing a residential gate:
Dealing with cracks and chips
One of the most common types of damage you’ll have to deal with on your residential gate is cracks and chips. This happens when debris hits against the gate hard enough to chip off pieces of it or when pieces of your gate simply start to break apart due to pressure or age.
Having a smooth surface will prevent this type of damage from happening in most cases, but you can also add a protective coating over the top of your gate if you want added protection. You should also make sure that any sharp points or edges are filed down so they don’t chip off or cause damage later on.
Rust and Corrosion
The most common issue that arises after the installation of a residential gate is rusting. Rust occurs when metal comes in contact with oxygen and water. The two create an electrolyte which makes the metal weak. Once this happens, the metal becomes weak, and it is only a matter of time before it begins to fail.
When rust appears on your gate, it will require immediate repair. If not dealt with quickly, rust can become so severe it will compromise the entire gate system causing you to have to replace it entirely. If you notice signs of rust on your gate, contact your gate company immediately for gate repairs Perth.
Mechanical Issues
Cracked or loose hinges can cause problems with the swing of your gate; you may have trouble opening or closing it. If the cracks are small, you may be able to glue the pieces back together. You can also sand the area around the crack and fill it in with epoxy resin, then sand it smooth once it dries.
If your hinges are loose, you may need to replace them or reset them by drilling new holes, depending on why they became loose in the first place. A gate that’s improperly aligned can strain its hinges, eventually leading to cracks and other damage. Give Nex Gen Tradies a call if this happens. They’ll fix your gate properly so that you don’t have any further issues with it down the line.
Broken Chain
If the chain on your gate breaks, it could be due to the chain being too short or worn down. This is a very common problem when it comes to residential gates, and it can cause serious damage to your home, thus the need for gate repairs.
If this happens, you should immediately call an expert who specializes in repairing chains. They will replace any parts that have been damaged and repair any other problems with your gate so that it works like new again.
Installing a gate is a big project, and it’s common for DIYers to overlook the repairs and maintenance involved with a gate. Left untreated, these problems can lead to longer-term issues that leave you scrambling to find an affordable repairman. To help ensure that this doesn’t happen to you, we’ve broken down some of the common residential gate repair issues that you may run into after installation, followed by recommendations as to how you might handle them.
Recent Comments